How to Reset Ford Taurus Keyless Entry Without Factory Code

The keyless entry system in your Ford Taurus provides a convenient way to lock and unlock your vehicle without using a traditional key. However, if you find yourself locked out of your car or your keyless entry system is not functioning properly, you may need to reset it. In this article, we will guide you through the process of resetting your Ford Taurus keyless entry system even if you don’t have the factory code. But before that, let’s take a look at five interesting facts about the Ford Taurus.

Interesting Fact #1: The Ford Taurus was introduced in 1985 as a mid-size car. It quickly gained popularity and became one of the best-selling cars in the United States, with over 7 million units sold 2007.

Interesting Fact #2: The Ford Taurus has been featured in various movies and TV shows, including “RoboCop,” “Men in Black,” and “Breaking Bad.” It has become an iconic car in the entertainment industry.

Interesting Fact #3: The Ford Taurus was the first car to have a center high-mounted stop lamp (CHMSL) in the rear window. This additional brake light improved visibility and safety on the road.

Interesting Fact #4: The Ford Taurus has undergone several generations of redesigns since its introduction. The latest generation, introduced in 2020, features a sleek and modern design with advanced technology and safety features.

Interesting Fact #5: The Ford Taurus is also available as a police interceptor vehicle. It is used many police departments across the United States due to its reliability, performance, and spacious interior.

Now that we’ve learned some interesting facts about the Ford Taurus, let’s move on to resetting the keyless entry system.

To reset your Ford Taurus keyless entry system without the factory code, you will need to perform a series of steps. Here’s a step--step guide:

Step 1: Enter your vehicle and close all doors.

Step 2: Insert the key into the ignition and turn it to the “On” position without starting the engine.

Step 3: Press and hold both the “Unlock” and “Lock” buttons on your keyless entry remote simultaneously.

Step 4: After holding the buttons for about 5 seconds, release them. You should hear a chime indicating that the keyless entry system has entered programming mode.

Step 5: Within 5 seconds of hearing the chime, press any button on your keyless entry remote. You should hear another chime indicating that the remote has been successfully programmed.

Step 6: Repeat Step 5 for any additional keyless entry remotes you want to program.

Step 7: Turn the ignition off and remove the key.

Congratulations! You have successfully reset your Ford Taurus keyless entry system without the factory code. Your keyless entry remotes should now be functional again.

Here are some common questions about resetting the Ford Taurus keyless entry system:

Q1: Can I reset the keyless entry system without a remote?
A1: No, you will need at least one working keyless entry remote to reset the system.

Q2: How many keyless entry remotes can I program?
A2: You can program up to four keyless entry remotes for your Ford Taurus.

Q3: What should I do if the keyless entry system is still not working after resetting?
A3: If the issue persists, you may need to check the battery in your keyless entry remote or consult a professional.

Q4: Will resetting the keyless entry system erase my programmed remotes?
A4: No, resetting the system will not erase the programming of your remotes.

Q5: How long does the programming mode stay active?
A5: The programming mode will stay active for about 20 seconds. If you take longer than that to program your remotes, you may need to start over.

Q6: Can I program a new remote myself?
A6: Yes, you can program a new remote using the same steps mentioned earlier.

Q7: What if I lose all my keyless entry remotes?
A7: In that case, you will need to visit a Ford dealership to have the keyless entry system reprogrammed.

Q8: Can I reset the keyless entry system using the factory code?
A8: Yes, if you have the factory code, you can reset the system using the instructions provided in the owner’s manual.